BK21

Effect of Bottom Sheet Thickness on Weld properties during Laser Lap Welding of Aluminum and Copper

Recent advances and future prospects of thermochemical biofuel conversion processes with machine learning

Experimental and numerical study of Si annealed by laser sources of the visible spectrum (red and blue wavelength)

Effect of Bottom Sheet Thickness on Weld properties during Laser Lap Welding of Aluminum and Copper

Hot-Cracking Mechanism of Laser Welding of Aluminum Alloy 6061 in Lap Joint Configuration

Analysis of Fabrication Process on Direct Edge Sealing with Microwave for Vacuum Glazing

Experimental Investigation of the Peel Strength of Artificial Leather and Polypropylene Specimens

Terahertz metamaterials for biomolecule sensing based on symmetry-broken unit resonators

Effects of surface treatment method and fabric type on adhesion between PP material and artificial fabrics

Cooling Strategy Optimization of Cylindrical Lithium-Ion Battery Pack via Multi-Counter Cooling Channels

Effect of flame-retardant melamine and dispersants on the mechanical, thermal, and foaming properties of flexible polyurethane foam

Analysis of mechanical and flame-retardant properties of flexible polyurethane foams

Analyzing the stress characteristics of glass as a function of cooling rate when applying air and mist for rapid cooling of glass heated to high temperatures

Development of high-performance flexible radiative cooling film using PDMS/TiO2 microparticles

Evaluating suitability of green laser annealing in developing phosphorous-doped silicon for semiconductor devices

Changes of Microstructural Characteristics of Cement-based Material in Scabbling Process Using Nanosecond Pulsed Laser

Power Management Strategy of Hybrid Fuel Cell Drones for Flight Performance Improvement Based on Various Algorithms

Defect Detection Model Using CNN and Image Augmentation for Seat Foaming Process

Experimental validation for the interconversion between generalized Kelvin–Voigt and Maxwell models using human skin tissues

Synergistic effect of amine and borane in immobilized metallocene catalysts on ethylene polymerization

Tailored chemical modification of ZSM-5 zeolite supports for Mo-based catalysts optimized for methane dehydroaromatization: Hydrothermal dealumination was key to improving the selectivity of desired aromatic compounds

Adaptive practical prescribed-time formation tracking of networked nonlinear multiagent systems with quantized inter-agent communication

Electroconvective instability at the surface of one-dimensionally patterned ion exchange membranes

Enhanced salt removal of fresh water by recovery-reduced ion concentration polarization desalination

Electroconvective instability at the surface of one-dimensionally patterned ion exchange membranes

Light-induced edge-excitation of two-dimensional surface polaritons in atomically thin crystals

Vibration Control of Car Body and Wheel Motions for In-Wheel Motor Vehicles Using Road Type Classification

Development of hybrid-powered, sustainable multi-purpose drone system: An analysis model

Distributed quantized state feedback strategy for ensuring predesignated formation tracking performance of networked uncertain nonholonomic multi-robot systems with quantized communication

Quantized-communication-based neural network control for formation tracking of networked multiple unmanned surface vehicles without velocity information

A study of laser cleaning to remove by-products occurring after arc welding

Methodology for Sound Quality Analysis of Motors for Automotive Interior Parts through Subjective Evaluation

Analysis of energy consumption for microwave hopper dryer on a pilot scale

Fracture mechanism of AISI 1025 rod shearing in automatic multi-stage cold forging and critical shearing speed

Realizing high stretch ratio of flexible wavy circuit via laser carving

A universal error transformation strategy for distributed event-triggered formation tracking of pure-feedback nonlinear multiagent systems with communication and avoidance ranges

Past, present and future of materials’ applications for CO2 capture: A bibliometric analysis

In-Depth Characterization of Laser-Welded Aluminum-and-Copper Dissimilar Joint for Electric Vehicle Battery Connections

Comprehensive Analysis of Phosphorus-Doped Silicon Annealed by Continuous-Wave Laser Beam at High Scan Speed

Modeling, design optimization and field testing of a solar still with corrugated absorber plate and phase change material for Karachi weather conditions

Enhancing stretch ratio on cross-section of wavy circuit in stretchable devices

Cost-Effective and Facile Fabrication of a Tattoo Paper-Based SERS Substrate and Its Application in Pesticide Sensing on Fruit Surfaces

Detectability of Subsurface Defects in Polypropylene/Glass Fiber Composites Using Multiple Lock-in Frequency Modulated Algorithms

Validation of axial and transverse force-displacement responses and principal strain rate ratios in the critical zone as a precursor to anisotropic damage prediction in metal sheets

Review of the adsorption equilibria of CO2, CH4, and their mixture on coals and shales at high pressures for enhanced CH4 recovery and CO2 sequestration

Cost-Effective and Facile Fabrication of a Tattoo Paper-Based SERS Substrate and Its Application in Pesticide Sensing on Fruit Surfaces

Distributed adaptive formation tracking using quantized feedback communication for networked mobile robots with unknown wheel slippage

Effect of preparation condition in one-pot synthesis of MgCl2-supported Ziegler-Natta catalyst on ethylene-1-octene copolymerization

Babinet-principle-inspired Metasurfaces for Resonant Enhancement of Local Magnetic Fields

Numerical and experimental study on melt-pool heat transfer and weld characteristics in dual-mode fiber laser welding of aluminum alloy

The influence of the proportion of silica sand on cement mortar during laser irradiation

Parametric study of pulsed nanosecond laser interaction with carbon-nanotube composite bipolar plate for PEMFCs

Preconcentration of fluorescent dyes in electromembrane systems via electrophoretic migration

Redox flow desalination for tetramethylammonium hydroxide removal and recovery from semiconductor wastewater

Effect of spiral welding path and laser power on weld in laser welding of aluminum tab for lithium-ion battery

Multi-electrode scale-up strategy and parametric investigation of redox-flow desalination systems

Olefin polymerization behavior of metallocene immobilized inside pore of metal-organic frameworks

Parametric investigation of ferri/ferrocyanide redox flow for performance

optimization of redox flow desalination

Selective Pb2+ removal and electrochemical regeneration of fresh and recycled FeOOH

Approximation-free design for distributed formation tracking of networked uncertain underactuated surface vessels under fully quantized environment

Distributed dynamic obstacle avoidance design to connectivity-preserving formation control of uncertain underactuated surface vehicles under a directed network

Enhancing the stretch ratio of a vertically stacked wavy circuit in stretchable devices

Redox-Copolymers for Nanofiltration-Enabled Electrodialysis

State-Transformation-Based Recursive Design Strategy for Leader-Follower Safety Formation Control of Uncertain Multiple Quadrotors

Conductive carbon additives: Friend or foe of capacitive deionization with activated carbon?

Reflection of two-dimensional surface polaritons by metallic nano-plates on atomically thin crystals

Phenol degradation on electrochemically self-doped TiO2 nanotubes via indirect oxidation

Chemical and physical characteristics of hybrid alkaline cement composite after laser interaction

Thermally/mechanically robust anodic aluminum oxide (AAO) microheater platform for low power chemoresisitve gas sensor

Damage prediction in thermoplastics under impact loading using a strain rate-dependent GISSMO

Effect of laser-induced groove morphology on the wettability and performance of Lithium-ion batteries

Effects of Annealing for Strength Enhancement of FDM 3D-Printed ABS Reinforced with Recycled Carbon Fiber

Virtual angle-based adaptive control for trajectory tracking and balancing of ball-balancing robots without velocity measurements

The effect of incidence angle on the interaction of a pulse laser with ultra-high-performance concrete in the scabbling process

Research hotspots and development trends in the rubber industry wastewater treatment: A quantitative analysis of literature

Analysis of influence factors for heat generation minimization of DC‐link capacitor

Automated defect detection using threshold value classification based on thermographic inspection

Evolution of instantaneous r-values in the post-critical region and its implications on the deformation behavior

Synthesis of Star-shaped Poly(ε-caprolactone) and Its Application to Drug Delivery Material

Adaptive secure control for leader-follower formation of nonholonomic mobile robots in the presence of uncertainty and deception attacks

The effect of laser beam intensity distribution on weld characteristics in laser welded aluminum alloy (AA5052)

Continuous separation of submicron-scale oil droplets in aqueous electrolyte by electrophoretic migration

Quantized feedback control strategy for tracking performance guarantee of nonholonomic mobile robots with uncertain nonlinear dynamics

Quantized-states-based adaptive control against unknown slippage effects of uncertain mobile robots with input and state quantization

Numerical investigation of the effects of the beam scanning pattern and overlap on the temperature distribution during the laser dopant activation anneal process

Shape optimization of discontinuous armature arrangement PMLSM for reduction of thrust ripple

Progress of microfluidic continuous separation techniques for micro-/nanoscale bioparticles

The Effect of Silica Sand Proportion in Laser Scabbling Process on Cement Mortar

Inverse approach of parameter optimization for nonlinear meta-model Using finite element simulation

Latest advances in common signal processing of pulsed thermography for enhanced detectability: A Review

Laser cutting of silicon anode for lithium-ion batteries

Nanogap formation using a chromium oxide film and its application as a palladium hydrogen switch

The interaction of high-power fiber laser irradiation with intrusive rocks

A handheld-type total integrated capillary electrophoresis system for SARS-CoV-2 diagnostics: Power, fluorescence detection, and data analysis by smartphone

Design of large-scale microwave cavity for uniform and efficient plastic heating

Analysis of erosion minimization for a slurry pump using discrete phase model simulations

A numerical-thermal-thermographic NDT evaluation of an ancient marquetry integrated with X-ray and XRF surveys

Applications of Magnetorheological Fluid Actuator to Multi-DOF Systems: State-of-the-Art from 2015 to 2021

Simultaneous Estimation of Unknown Road Roughness Input and Tire Normal Forces Based on a Long Short-Term Memory Model

Automatic Screening of Bolts with Anti-Loosening Coating Using Grad-CAM and Transfer Learning with Deep Convolutional Neural Networks

Robust trajectory tracking with adjustable performance of underactuated surface vessels via quantized state feedback

Evaluation of Spoiler Model Based on Air Cooling on Lithium-ion Battery Pack Temperature Uniformity

Determination and verification of GISSMO fracture properties of bolts used in radioactive waste transport containers

Finite Element Analysis and SVR-based Optimal Design to Minimize Deformation of an Indoor Bicycle Handle Frame Equipped with a Monitor

Design and Control of Multi-Plate MR Clutch Featuring Friction and Magnetic Field Control Modes

Binarization Mechanism Evaluation for Water Ingress Detectability in Honeycomb Sandwich Structure Using Lock-In Thermography

Experimental Study on Ion Transport in Microfluidic Electrodialysis Using Partially Masked Ion Exchange Membranes

Experimental Study on Ion Transport in Microfluidic Electrodialysis Using Partially Masked Ion Exchange Membranes

Approximation Method for Stress–Strain Using Metamodel Parameter Updating

Experimental study on ion transport in microfluidic electrodialysis using partially masked ion exchange membranes

Thermographic Inspection of CLP Defects on the Subsurface Based on Binary Image

Study on quantification of stress according to sound pressure level of road noise: Case of salivary cortisol and heart rate

Design and Analysis of a Hybrid Annular Radial Magnetorheological Damper for Semi-Active In-Wheel Motor Suspension

In-depth characterization of an aluminum alloy welded by a dual-mode fiber laser

Defect Recognition and Morphology Operation in Binary Images Using Line-Scanning-Based Induction Thermography

Numerical Study on the Laser Annealing of Silicon Used in Advanced V-NAND Device

Stress Triaxiality in Anisotropic Metal Sheets—Definition and Experimental Acquisition for Numerical Damage Prediction

Study of phosphorus-doped Si annealed by a multi-wavelength laser

An experimental investigation of laser scabbling on cement-based materials using nanosecond fiber laser

Effect of the physicochemical properties of SiO2 on performance of supported metallocene catalyst

Effect of packing density on maximum stretch ratio of stretchable wavy circuits

Mechanical and microstructural investigation of dissimilar joints of Al-Cu and Cu-Al metals using nanosecond laser

Simultaneous Estimation of Vehicle Mass and Unknown Road Roughness Based on Adaptive Extended Kalman Filtering of Suspension Systems

Metamaterials for enhanced optical responses and their application to active control of terahertz waves

Self-powered gas sensor based on a photovoltaic cell and a Colorimetric film with hierarchical micro/nanostructures

Disturbance observer-based control for trajectory tracking of a quadrotor

Thermographic inspection of internal defects in steel structures: Analysis of signal processing techniques in pulsed thermography

Numerical Investigations on the Shape Optimization of Stainless-Steel Ring Joint with Machine Learning

Deep learning-based estimation of the unknown road profile and state variables for the vehicle suspension system

Experimental determination of the plastic deformation and fracture behavior of polypropylene composites under various strain rates

Experimental and numerical study on shearing of a rod to produce long billets for cold forging

Effect of fluence and multi-pass on groove morphology and process efficiency of laser structuring for 3D electrodes of lithium-ion batteries

Determination of post-necking stress-strain relationship for zirconium low-oxidation based on actual cross-section measurements by DIC

A comparative study on wettability of unstructured and structured LiFePO4 with nanosecond pulsed fiber laser

Connectivity-maintaining and collision-avoiding performance function approach for robust leader-follower formation control of multiple uncertain underactuated surface vessels

The effect of laser parameters on cutting metallic materials

The effect of using a metal tube on laser welding of the battery case and the tab for lithium-ion battery

Determination of the Forming Limit for a ZIRLO™ Sheet with High Anisotropy

An experimental investigation on the cutting quality of three different rock specimens using high power multimode fiber laser

Gap-size-dependent effective phase transition in metasurfaces of closed-ring resonators

Laser beam oscillation welding of aluminum alloy using the spatially modulated beam by diffractive optical element (DOE)

Effect of Au-coating on the laser spot cutting on spring contact probe (SCP) for semi-conductor inspection

A new fracture detection algorithm of low amplitude acoustic emission signal based on Kalman filter-ripple voltage

A new fracture detection algorithm of low amplitude acoustic emission signal based on Kalman filter-ripple voltage

Connectivity-maintaining obstacle avoidance approach for leader-follower formation tracking of uncertain multiple nonholonomic mobile robots

Neural network control for trajectory tracking and balancing of a ball-balancing robot with uncertainty

Dynamic analysis of semi-active MR suspension system considering response time and damping force curve

Hybrid multi-plate magnetorheological clutch featuring two operating modes: Fluid coupling and mechanical friction